Efficient synthesis of an imidazole-substituted delta-amino acid by the integration of chiral technologies

Two methods to produce (2S)-5-amino-2-(1-n-propyl-1H-imidazol-4-ylmethyl)-pentanoic acid were investigated. Diastereoisomeric salt resolution, using the quinidine salt, gave the desired intermediate in 98% ee and 33% yield. Asymmetric hydrogenation of various substrates gave high conversions, with up to 83% ee. Integration of these two approaches via asymmetric hydrogenation of a quinidine salt substrate followed by crystallization provided the desired intermediate in 94% ee and 76% yield.     

Dimerization of some substituted benzoic acids in aqueous solution from conductance measurements

Precision molar conductances of benzoic, o-toluic, 2,6-dimethylbenzoic, 2,3,6-trimethylbenzoic, and, o-fluorobenzoic acids have been determined in aqueous solution as a function of temperature and of concentration up to near saturation (<0.035 M). At the higher concentrations molar conductances are found to be less than anticipated for the simple dissociation of a 1-1 electrolyte. Although the deviations are only 1% or less they have been interpreted to show that these acids are dimerized in solution. The interpretation includes an assumption that the dimer ionizes to produce a triple ion. Increasing numbers of methyl groups lead to increasing dimerization. For those acids with two ortho groups the dimerization increases with increasing temperature while the other three show decreasing dimerization with increasing temperature. Temperature functions have been determined for the dimerization constants and from these functions standard changes in enthalpy, entropy, and heat capacity have been determined. Comparisons are made with dimerization studies in non-aqueous solvents. From these as well as the behavior of benzene in water it is concluded that a major factor driving the dimerization is hydrophobic interaction. To provide a limiting conductance of the triple ion needed in the dimerization calculations a conductance study was also made for o-Phenylbenzoic acid on the assumption that its anion provides an approximate model of the triple ion.     

The use of novel water-in-oil microemulsions in microemulsion electrokinetic chromatography

We describe the novel use of water-in-oil (W/O) microemulsions to achieve unique separations in microemulsion electrokinetic chromatography (MEEKC). The choice and concentration of the buffer type, surfactant and co-surfactant were all examined and optimized. Separations of a range of neutral and acidic analytes was shown to be markedly different to that obtained by (oil-in-water) O/W MEEKC. Neutral solutes are separated by virtue of their solubility (log P) values in O/W MEEKC with the more water-insoluble solutes migrating last. This separation process does not occur in W/O, as neutral solutes are not separated in order of log P.     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

Acyclic congener of cucurbituril: synthesis and recognition properties

The cucurbit[n]uril (CB[n]) family of macrocycles occupies a prominent role in molecular recognition and self-assembly studies despite the current inability to access specific cucurbit[n]uril homologues, derivatives, and analogues by straightforward tailor-made synthetic procedures. In this paper, we explore an approach that circumvents the challenges posed by the tailor-made synthesis of macrocyclic CB[n] by preparing 1, which functions as an acyclic CB[6] congener. The o-xylylene connections to the glycoluril rings preorganize 1 into the (a,a,a,a)-1 conformation required for binding and reduce its tendency to undergo self-association. We surveyed the binding properties of 1 toward 16 amines (K(a) 相似文献   

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

The crystal and molecular structure of DI-trans-β-styrylmercury

The structure of di-trans-β-styrylmercury has been determined by single crystal X-ray methods from counter data. The compound crystallizes in the orthorhombic space group Pbcn with unit cell dimensions a 15.413(6), b 11.161(9), c 7.668(5) Å, V 1319(1) ų, D_calc 2.049 g/cm³, and Z = 4. The crystal was solved by conventional heavy atom techniques. The crystal consists of individual molecular units with the mercury atom located on a two fold axis of symmetry. The CHgC fragment is nearly linear with an angle of 178°. The β-styryl groups are oriented so that a dihedral angle of 66.8° is formed between the planes defined by HgC(1)C(2) and HgC(1)′C(2)′ fragments. The HgC bond distance is 2.07(4) Å.     

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.